Welcome to FIT2034 Computer Programming 2 for Semester 1, 2009. This 6 point unit is a core unit in the following majors of the Bachelor of Information Technology and Systems (BITS) degree:
The unit has been introduced to supplement your first programming unit FIT1002 to provide you with an understanding of more advanced concepts in object-oriented programming.
This unit introduces more advanced object-oriented programming topics and techniques than its prerequisite, and gives students a deeper understanding of programming and data structures and more practical skills in designing, building and testing computer programs.
At the completion of this unit, students will have attitudes that will allow them to:
At the completion of this unit, students will be able to:
For on campus students, workload commitments are:
You will need to allocate up to 5 hours per week in some weeks, for use of a computer, including time for newsgroups/discussion groups.
Off-campus students generally do not attend lecture and tutorial sessions, however, you should plan to spend equivalent time working through the relevant resources and participating in discussion groups each week.
Students beginning Computer Programming 2 are assumed to be able to:
FIT2034 is a core unit in the majors of the Bachelor of Information Technology and Systems. It may be taken as an elective in other programs where you have satisfied the prerequisites and where course rules permit.
It is a prerequisite for:
Before attempting this unit you must have satisfactorily completed either CSE1202, GCO1811, CPE1001, FIT1002 or equivalent.
You may not study this unit if you have studied or intend to study any of the following units in your degree: CFR1124, CFR2128, CFR3112, GCO1812, GCO3821, SFT1102, CSE1203, CSE2305, CPE1004, FIT1008, FIT1007, FIT1015.
Monash is committed to ‘Excellence in education’ (Monash Directions 2025 - http://www.monash.edu.au/about/monash-directions/directions.html) and strives for the highest possible quality in teaching and learning.
To monitor how successful we are in providing quality teaching and learning Monash regularly seeks feedback from students, employers and staff. One of the key formal ways students have to provide feedback is through Unit Evaluation Surveys. The University’s Unit Evaluation policy (http://www.policy.monash.edu/policy-bank/academic/education/quality/unit-evaluation-policy.html) requires that every unit offered is evaluated each year. Students are strongly encouraged to complete the surveys as they are an important avenue for students to “have their say”. The feedback is anonymous and provides the Faculty with evidence of aspects that students are satisfied and areas for improvement.
Faculties have the option of administering the Unit Evaluation survey online through the my.monash portal or in class. Lecturers will inform students of the method being used for this unit towards the end of the semester.
The approach to teaching and learning include a weekly two-hour lecture and a two-hour (laboratory). Additionally, each student should spend a minimum of 8 to 12 hours for personal study every week and should allocate up to 5 hours per week in some weeks for use of a computer, including time for newsgroup and discussion.
Caulfield students should check the timetable using Monash Timetabling System: http://mutts.monash.edu.au/MUTTS/
For information on timetabling for on-campus classes at Sunway Campus please refer to http://www.monash.edu.my/timetables/infotech.html
Monash aims to provide a learning environment in which students receive a range of ongoing feedback throughout their studies. You will receive feedback on your work and progress in this unit. This may take the form of group feedback, individual feedback, peer feedback, self-comparison, verbal and written feedback, discussions (on line and in class) as well as more formal feedback related to assignment marks and grades. You are encouraged to draw on a variety of feedback to enhance your learning.
It is essential that you take action immediately if you realise that you have a problem that is affecting your study. Semesters are short, so we can help you best if you let us know as soon as problems arise. Regardless of whether the problem is related directly to your progress in the unit, if it is likely to interfere with your progress you should discuss it with your lecturer or a Community Service counsellor as soon as possible.
| Week | Topic | Key dates |
|---|---|---|
| 1 | Revising Java Concepts | |
| 2 | Designing objects | |
| 3 | Association/Aggregation relationships | Week 2 Exercise Due |
| 4 | Inheritance and Polymorphism | Week 3 Exercise Due |
| 5 | Interfaces and Abstract Classes | Week 4 Exercise Due |
| 6 | GUI and Event Handling | Week 5 Exercise Due |
| Mid semester break | ||
| 7 | Recursion | Week 6 Exercise Due |
| 8 | Exceptions | Week 7 Exercise Due |
| 9 | File Input/Output | |
| 10 | Utility Classes | Week 9 Exercise Due |
| 11 | Dynamic Data Structures, ADTs and Collection Classes | |
| 12 | Testing and Debugging | Programming Assignment Due on Fri 29 May |
| 13 | Revision | |
Prescribed Text:
Text books are available from the Monash University Book Shops. Availability from other suppliers cannot be assured. The Bookshop orders texts in specifically for this unit. You are advised to purchase your text book early.
Prescribed Software
You must have the Java 2 SE SDK version 1.5.0 (also called Java 5) or later installed on your computer. It can also be downloaded from the internet by going to http://java.sun.com/javase/downloads/index.jsp
Other Useful Software
BlueJ
Some locations will be using BlueJ. This also works on Macintosh computers. It can also be downloaded from http://www.bluej.org/download/download.html.
JCreator LE
This is an IDE which provides many useful compilation features. It only works on Windows operating systems. The smallish download can be obtained from http://www.jcreator.com/download.htm. Be sure to select the LE version 3.5 file, which is free (unless you want to pay for the more comprehensive version).
TortoiseSVN
For experienced programmers who want a source-code management system that runs on Windows, TortoiseSVN is strongly recommended. This open-source software can be downloaded from: http://tortoisesvn.sourceforge.net/downloads. (Most users should download the very first file, the 32-bit msi file). There are also language-packs for languages other than english. On campus classes might demonstrate this tool at some point in the semester.
Study resources we will provide for your study are:
The Monash University Library site contains details about borrowing rights and catalogue searching. To learn more about the library and the various resources available, please go to http://www.lib.monash.edu.au.
The Educational Library and Media Resources (LMR) is also a very resourceful place to visit at http://www.education.monash.edu.au/library/
All unit and lecture materials are available through MUSO (Monash University Studies Online). Blackboard is the primary application used to deliver your unit resources. Some units will be piloted in Moodle. If your unit is piloted in Moodle, you will see a link from your Blackboard unit to Moodle (http://moodle.monash.edu.au) and can bookmark this link to access directly. In Moodle, from the Faculty of Information Technology category, click on the link for your unit.
You can access MUSO and Blackboard via the portal: http://my.monash.edu.au
Click on the Study and enrolment tab, then Blackboard under the MUSO learning systems.
In order for your Blackboard unit(s) to function correctly, your computer needs to be correctly configured.
For example:
For more information, please visit: http://www.monash.edu.au/muso/support/students/downloadables-student.html
You can contact the MUSO Support by phone : (+61 3) 9903 1268
For further contact information including operational hours, please visit: http://www.monash.edu.au/muso/support/students/contact.html
Further information can be obtained from the MUSO support site: http://www.monash.edu.au/muso/support/index.html
To pass this unit, a student must obtain:
If a student does not achieve 40% or more in the unit examination or the unit non-examination assessment, then a mark of no greater than 44-N will be recorded for the unit.
Title : Programming Assignment
Description :
Non-trivial programming assignment
Weighting : 20%
Criteria for assessment :
The specification and marking criteria will be distributed in week 3.
Due date : Friday 29 May 2009
Title : Lab Exercises
Description :
Weighting : 20%
Criteria for assessment :
Due date : Exercise distributed in the week will be due at the beginning of the following week's tute class
Weighting : 60%
Length : 3 hours
Type ( open/closed book ) : closed book
The work submitted must be your own work. Just as a written assignment requires you to sign a statement that the work is your own work, electronically submitted assignments must also contain a similar declaration. The cover sheet for the Faculty of Information Technology, can be found at http://www.infotech.monash.edu.au/resources/student/assignments/ . The text of the section titled "Student's Statement" should be typed into a file named declaration.txt, to be submitted with your other files.
The due dates for the submission of assignments are given in the previous section. Please make every effort to submit work by the due dates. It is your responsibility to structure your study program around assignment deadlines, family, work and other commitments. Factors such as normal work pressures, vacations, etc. are seldom regarded as appropriate reasons for granting extensions. Students are advised to NOT assume that granting of an extension is a matter of course.
Requests for extensions must be made to the unit lecturer at your campus at least two days before the due date. You will be asked to forward original medical certificates in cases of illness, and may be asked to provide other forms of documentation where necessary. A copy of the email or other written communication of an extension must be attached to the assignment submission.
Students can expect assignments to be returned within two weeks of the submission date or after receipt, whichever is later.
Assessment for the unit as a whole is in accordance with the provisions of the Monash University Education Policy at http://www.policy.monash.edu/policy-bank/academic/education/assessment/
We will aim to have assignment results made available to you within two weeks after assignment receipt. Even if there is a delay in returning your assignment result, the sample solution will be made available within two weeks after the due date.Plagiarism and cheating are regarded as very serious offences. In cases where cheating has been confirmed, students have been severely penalised, from losing all marks for an assignment, to facing disciplinary action at the Faculty level. While we would wish that all our students adhere to sound ethical conduct and honesty, I will ask you to acquaint yourself with the University Plagiarism policy and procedure (http://www.policy.monash.edu/policy-bank/academic/education/conduct/plagiarism-procedures.html) which applies to students detected plagiarising.
In this University, cheating means seeking to obtain an unfair advantage in any examination or any other written or practical work to be submitted or completed by a student for assessment. It includes the use, or attempted use, of any means to gain an unfair advantage for any assessable work in the unit, where the means is contrary to the instructions for such work.
When you submit an individual assessment item, such as a program, a report, an essay, assignment or other piece of work, under your name you are understood to be stating that this is your own work. If a submission is identical with, or similar to, someone else's work, an assumption of cheating may arise. If you are planning on working with another student, it is acceptable to undertake research together, and discuss problems, but it is not acceptable to jointly develop or share solutions unless this is specified by your lecturer.
Intentionally providing students with your solutions to assignments is classified as "assisting to cheat" and students who do this may be subject to disciplinary action. You should take reasonable care that your solution is not accidentally or deliberately obtained by other students. For example, do not leave copies of your work in progress on the hard drives of shared computers, and do not show your work to other students. If you believe this may have happened, please be sure to contact your lecturer as soon as possible.
Cheating also includes taking into an examination any material contrary to the regulations, including any bilingual dictionary, whether or not with the intention of using it to obtain an advantage.
Plagiarism involves the false representation of another person's ideas, or findings, as your own by either copying material or paraphrasing without citing sources. It is both professional and ethical to reference clearly the ideas and information that you have used from another writer. If the source is not identified, then you have plagiarised work of the other author. Plagiarism is a form of dishonesty that is insulting to the reader and grossly unfair to your student colleagues.
The university requires faculties to keep a simple and confidential register to record counselling to students about plagiarism (e.g. warnings). The register is accessible to Associate Deans Teaching (or nominees) and, where requested, students concerned have access to their own details in the register. The register is to serve as a record of counselling about the nature of plagiarism, not as a record of allegations; and no provision of appeals in relation to the register is necessary or applicable.
The Faculty of Information Technology is committed to the use of non-discriminatory language in all forms of communication. Discriminatory language is that which refers in abusive terms to gender, race, age, sexual orientation, citizenship or nationality, ethnic or language background, physical or mental ability, or political or religious views, or which stereotypes groups in an adverse manner. This is not meant to preclude or inhibit legitimate academic debate on any issue; however, the language used in such debate should be non-discriminatory and sensitive to these matters. It is important to avoid the use of discriminatory language in your communications and written work. The most common form of discriminatory language in academic work tends to be in the area of gender inclusiveness. You are, therefore, requested to check for this and to ensure your work and communications are non-discriminatory in all respects.
Students with disabilities that may disadvantage them in assessment should seek advice from one of the following before completing assessment tasks and examinations:
Deferred assessment (not to be confused with an extension for submission of an assignment) may be granted in cases of extenuating personal circumstances such as serious personal illness or bereavement. Information and forms for Special Consideration and deferred assessment applications are available at http://www.monash.edu.au/exams/special-consideration.html. Contact the Faculty's Student Services staff at your campus for further information and advice.